Curing Machine
Cure M
In order to realize the characteristics of a photopolymer material 100%,
post-processing is very important.
Cure M is a top-class post-curing machine that can completely cure materials in
a short amount of time using high UV light intensity.
- To maximize
material properties
- High Power UV intensity
and irradiance
- More faster
Post curing(1-10mins)
The same material can yield different results depending on the curing machine!
Cure M
U-102H
Cure M U102H is not just a curing machine, but the best post-curing solution.
With 3-direction irradiation through optimized design, high-intensity UV LED, and low angle lens focus, it creates more than just a 3D printed appliance.
Characteristics and Strengths
- Fast curing time using high-intensity UV LED (1~30 minutes)
- Can adjust UV LED power level for various 3D products (1~30 minutes)
- UV irradiation from 3 sides (left, right, and top) for high quality product and increased curing quality
- Safety cooling system and LED temperature to ensure user safety
- Innovative and easy-to-use design
- Auto-turning table for uniform curing
- Attached low angle lens to increase UV LED intensity
- Optimized intensity for 385/395/405nm wavelength resins
Data Sheet
| Properties | U102H(Dental) |
|---|---|
| Light Source | UV LED |
| Curing Time | 1-25mins |
| Input Voltage | 100-240 V. 50/60Hz |
| Output Voltage | 24V, 5.4A |
| Display | 3.5” TFT Touch LCD |
| LED Wavelength | 395nm / 405nm |
| LED Power Output | 80W |
| UV Energy density Irradiance of UV |
120,000mJ/㎠ 400mW/㎠ |
| LED Operation Temp | 5-35℃ |
| Curing Chamber(Tunrtable) | 120Ø, 95mm(H) |
| Outer Dimension | 250 × 386 × 378mm(W×D×H) |
| Weight | 9kg |
Cure M
U-201H
Cure M U201H is a high-strength UV LED post-curing machine that can be used universally for prototypes, models, jewelry, etc.
Characteristics and Strengths
- Fast curing time using high-intensity UV LED (1~30 minutes)
- Can adjust UV LED power level for various 3D products (1~30 minutes)
- UV irradiation from 3 sides (left, right, and top) for high quality product and increased curing quality
- Safety cooling system and LED temperature to ensure user safety
- Innovative and easy-to-use design
- Auto-turning table for uniform curing
- Attached low angle lens to increase UV LED intensity
- Can cure 3D printed objects with size of 180x180x180mm (WxDxH)
Data Sheet
| Properties | U201H(Medium size) |
|---|---|
| Light Source | UV LED |
| Curing Time | 3-10mins |
| Input Voltage | 100-240 V. 50/60Hz |
| Output Voltage | 24V, 6.5A |
| Display | 3.5” TFT Touch LCD |
| LED Wavelength | 395nm / 405nm |
| LED Power Output | 112W |
| UV Energy density Irradiance of UV |
80,000mJ/㎠ 200mW/㎠ |
| LED Operation Temp | 5-35℃ |
| Curing Chamber(Tunrtable) | 180Ø, 200mm(H) |
| Outer Dimension | 320 × 465 × 467mm(W×D×H) |
| Weight | 12kg |
